14 May 2012 |
In the occasion the international exhibition and conference for electric automation exhibition to be held from May 22 to 24 in Parma (Italy), Rustandard is pleased to invite all those who wish to know more about the certification of the CIS countries to stand at 019, Hall 2. On 24 May at 10.30 am in Room 300 of (in front of Hall 2) is provided for the direct intervention of the responsible of Rustandard Italy with a report on certification and
|
|
18 April 2012 |
The burners, hot air generators and almost all gas appliances, liquid fuel or a mixture usually belong to a category of products that may pose a potential source of risk to their user safety and location of their installation. Consequently, for these devices in the Russian Federation the compulsory certification is required. At the date of publication of this article in Russia have been approved and came into force two legal documents that establish minimum requirements for this type of equipment. This is the Technical regulation No. 753 of 15/09/2009
|
02 April 2012 |
In the most common sense of the term, a valve is a basic component in a more complex mechanism of pipes and serves as a liquid, placed under pressure, can easily pass through or not, depending on its opening or closing through it, then escape and get to your destination. More precisely, a valve is located in the heart of this mechanism and is activated by an automatic and manual, able to regulate the delivery and the passage of fluids or gaseous substances.
|
22 February 2012 |
On 15/02/2012 entered into force the first Technical Regulation of the Customs Union CU TP 006/2011 "On safety of fireworks". The effect of this regulatory document covers produced for circulation in the territory of the Customs Union fireworks, regardless of their country of origin. Requirements affecting, in particular, household and entertainment pyrotechnics, lighting and signal pyrotechnics, fireworks, as well as industrial, educational and
|
06 February 2012 |
Russia is a major importer of furniture and furniture made in Italy. The style, quality and Italian design has always been appreciated by the privileged classes and sectors of the Russian population. To be imported and sold freely, however, these products must undergo certain procedures for conformity assessment, which we will briefly describe in this article.
|
|
|
<< Start < Prev 1 2 3 4 5 6 7 8 9 10 Next > End >>
|